Shell & Tube Heat Exchanger

Product Description

Shell & Tube Heat Exchanger

Biotek Engineers is manufacture, exporters & suppliers of: Shell & Tube Heat Exchanger

Description:
Shell and Tube Heat Exchanger are popular in process industries because they occupy less space and offer reasonable temperature drop. The apparatus consists of fabricated shell, inside which tubes with baffles on outer side are fitted. The present set up is a 1-2 heat exchangers, with cold water flows through shell. Valves are provided to control the flow rates of hot and cold water. Flow rates of hot and cold water are measured using Rotameters. A magnetic drive pump is used to circulate the hot water from a re-cycled type water tank, which is fitted with heaters and Digital Temperature Controller.
The main object of the experimental setup is to study the following at various flow rates:

Utilities required:
Water supply 20 lit/min (approx.) and drain.
Electricity Supply : 1 Phase, 220 V AC, 4 kW.
Floor area of 1.5 m x 0.75 m.

Technical Specifications:
System: Water to Water. (1–2 shell & tube type)
Shell: Material Stainless steel. Insulated with ceramic wool and cladded with aluminum foil. Dia. 220 mm, Length 500 mm (Approx.)
25% cut baffles at 100 mm distance 4 Nos
Tube: OD 16mm approx., Length 500mm (24 Nos.)
Water Flow Measurement: Rotameters (2Nos.) one each for cold & hot fluid
Hot Water Tank: Made of Stainless steel Insulated with ceramic fibre wool
Hot Water Circulation: Magnetic Pump
Heaters: Nichrome wire heater (2 Nos.)
Digital Temp. Controller: 0-199.90C, (For Hot Water Tank)
Digital Temp. Indicator: 0-199.90C, with multi-channel switch